TPP 30-109-D

AC/DC Medical Power Supply • High power density power supply (encapsulated) • Certification according to IEC/EN/ES 60601-1 3rd edition for 2 x MOPP • Low leakage current 95%, 250 periods, perf. criteria A EN 61000-4-11 30%, 25 periods, perf. criteria A 60%, 1 period, perf. criteria A >95%, 1 period, perf. criteria A >95%, 250 periods, perf. criteria A General Specifications Relative Humidity Temperature Ranges 95% max. (non condensing) –40°C to +85°C –40°C to +85°C - Operating Temperature - Storage Temperature All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 TPP 30-D Series, 30 Watt Power Derating Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Creepage Clearance Isolation Resistance Leakage Current (at 264 VAC) Reliability Washing Process Environment - High Temperature - Low Input Voltage - Input to Output, 60 s - Input to Case or PE, 60 s - Output to Case or PE, 60 s - Input to Output - Input to Output - Input to Output, 500 VDC - Touch Current Depending on model 4 %/V below 90 VAC See application note: www.tracopower.com/overview/tpp30-d Natural convection (20 LFM) 5'000 m max. 30 - 60 kHz (PWM) Reinforced Insulation 272 VAC 4'000 VAC 1'500 VAC 1'500 VAC 8 mm min. 8 mm min. 100 MΩ min. 75 µA max. 3'300'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf IEC 60068-2-6 IEC 60068-2-27 Silicone (UL 94 V-0 rated) Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) Lead-Free Wave Soldering 260°C / 6 s max. 106 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 6f54bbae-9494-4f25-8b88-daa1ae57fe06 - Calculated MTBF - Vibration - Mechanical Shock Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tpp30-d All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 TPP 30-D Series, 30 Watt Outline Dimensions 3 Bottom view Function 1 Neutral 2 Line 3 +Vout 4 –Vout 5 Trim 2 (0.742) 4 18.85 7.92 1 (0.312) 38.1 (1.50) 15.1 (0.59) Pin diameter: 1.0 mm (0.04 inch) Pin 3.96 (0.156) 10.92 (0.43) 25.4 (1.00) 3.8 (0.15) PCB Pinout 5 66.14 (2.604) 3.6 (0.14) 73.3 (2.89) Dimension in mm, () = inch Tolerances: x.x ±0.50 (±0.02) x.xx ±0.25 (±0.01) Pin pitch tolerance: ±0.25 (±0.010) Pin dimension tolerance: ±0.10 (±0.004) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5